Just as the headlight of the car could fade away with the passage of the time, similarly the paint of the car can also lose its shine over the time and could be affected by the intensity of the weather and especially the UV rays of the sun has a severe effect on the finish of the right vehicle paint repair. However other factors such as roads in winters, the sap from the tree also play their role in the fading of the car paint.
The time in which the car pain will fade is around 10 and sometimes 15 years. But the professional could fix this problem for you by the use of cut and polishes car paint. This paint adds the new finish on your car and helps in removing all the fading, corrosion, and even oxidization spots. There are people who confuse the compounding and paint restoration with cut and cut and polish car paint. But these two are different terms and different procedures are carried out in both of these processes.
The compounding makes use of the cutting paste. This paste is use to cut the scratches on the car and cut out the areas or the parts of the car which are hazed. On the other hand, polishing is something which is related to the restoration of the paint. It is not limited to one specific procedure but all the procedures through which the paint of the car is restored falls in the category of the polishing. Then there are the terms of paint rejuvenating and correction which are the name of the same procedure and it is used when the paint of the car is heavily damaged and oxidized and it includes at least three steps of polishing and painting. Then finally comes the cut and polish procedure, this is the procedure which is used to cut out the hazing swirl marks. The procedure first involves adding the cutting polish. This is referred to as the cutting polish because of the reason that it actually cuts out the imperfections in the paint of the car. These imperfections may be oxidized spots, scratches on the car, swirls and hazed areas. After this layer safely removes all these then a layer of paint is added on, then the last step is to use buffers on the applied paint with the use of the microfiber cloth.